The Wash-X is a unit developed for the inkjet fabric printing. Designed to provide continuous process of fabric preparation and fabric washing for the digital printing.
Two machines incorporated into one unit, they are capable of coating and washing almost any kind of fabric. Fabric washing is continuous, suitable for all type of inks and is design to save as much water as possible.
For coating, the amount of coating emulsion could be adjusted to suit all types of dyes, including reactive, acid and disperse dyes.

CONSISTING OF:

FABRIC FEEDER
Fabric unwinding device with fabric tension roller for fabric rolls of 350mm
Fabric join bar with needle holder

COATING / WASHING
Stainless steel coating/washing unit. This unit could handle fabrics of width up 1600-2200mm. Depends on machine model. The speeds of coating/washing and speed of fabric are adjustable according to used fabric. All set-ups are accessible using friendly touch screen.
Separate liquid tank allow easy exchange of used coating formula and is equipped with mixer for coating formula mixing and constant steering through coating process.
Washing with possible recycling of previously used water, waist tank, heated pre-wash basin. All incorporated into the same unit.

DRYER
The dryer is infra-red, double walled and is fully insulated to minimize any heat loss.
The heating and regulation are controlled via a digital temperature controller situated on the electrical cabinet
Small exhaust fan is situated on top of dryer.

BATCHING
Fabric re-winder can accommodate rolls up to 350 mm diameter and includes automatic speed control, which is regulated by a “dancing” bar.
The unit consists of scroll roller and one side fabric edge control. All functions of the Precoat-W are controlled by PLC with programmable terminal in auto and manual mode. The control panel is located in easy to reach position.
All units are mounted on swivel wheels.

OPTIONAL FEATURES
Set of recommended spare parts
On-site installation and training